Browse the MASTER TL-D Eco products and find the product that you are looking for by using the compare option.
Sort by:
Simple lamp-for-lamp replacement for more than 10% energy savings |
Makes lighting installations compliant with latest indoor lighting standards |
Relatively high efficacy, both initially and during lifetime, with high lumen maintenance |
The only T8 fluorescent lamp that saves more than 10% of energy in existing luminaires with electromagnetic gear
|
Lower power savings with electronic gear depending on type of gear (current- or power-controlled)
|
Can be directly retrofitted into existing fluorescent fittings operating on electromagnetic or electronic gear in indoor applications
|
Uses the latest highly efficient phosphors and special filling gas
|
High-quality lighting with good color rendering (CRI>80)
|
Light output comparable to other TL-D Super 80 colors
|
Lumen maintenance and lifetime the same as other TL-D Super 80 colors
|
Dimmable
|
For use in indoor applications with room temperatures above 20 °C (which implies temperature around the lamp of over 25-35 °C)
|
Primary focus on offices, schools and hospitals; secondary focus on retail, industry, supermarkets
|
Not recommended under the following conditions: - with air flow around the lamps - in luminaires with active air handling (lamp temperature will not be the required 25-35 °C, but room temperature) - in open luminaires/battens very close to air conditioning outlets or cold air flows - in space above freezers (temperature may easily drop below 20 °C) - in combination with VRUs (voltage reduction units)
|
A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
|