• CoreLine Trunking – the clear choice for LED

    LL121X LED80S/840 1x PSD WB 7 WH
    LED
    LL121X LED80S/840 1x PSD WB 7 WH

    LL121X LED80S/840 1x PSD WB 7 WH

    Order code: 38092500

    Full Product Code: 871869638092500

    Downloads

    Leaflet
    Size:505.9 kB

    See all downloads

Specifications Show all

General Information
Number of light sources
3  [ 3 pcs]
Lamp family code
LED80S  [ LED Module, system flux 8000 lm]
Beam angle of light source
120 °
Light source colour
840 neutral white
Light source replaceable
No
Number of gear units
1 unit
Driver/power unit/transformer
PSD  [ Power supply unit with DALI interface]
Driver included
Yes
Optic type
WB  [ Wide beam]
Optical cover/lens type
No  [ -]
Luminaire light beam spread
100° x 94°
Emergency lighting
No  [ -]
Control interface
DALI
Internal wiring
Standard
Feed-through wiring
Feed-through wiring 7-phase
Connection
CU7  [ Connection unit 7-pole]
Cable
-
Protection class IEC
Safety class I (I)
Mounting
SMB  [ Ceiling-mounting bracket]
Ready-to-install
-
Glow-wire test
650/5  [ Temperature 650 °C, duration 5 s]
Flammability mark
F  [ For mounting on normally flammable surfaces]
Accessories included
MB-SW  [ Mounting bracket for suspension wire]
CE mark
CE mark
ENEC mark
ENEC mark
Mechanical accessories
No  [ -]
Remarks
*-Per Lighting Europe guidance paper “Evaluating performance of LED based luminaires - January 2018”: statistically there is no relevant difference in lumen maintenance between B50 and for example B10. Therefore the median useful life (B50) value also represents the B10 value.
Constant light output
No
Number of products on MCB
24
RoHS mark
RoHS mark
Product Family Code
LL121X  [ CoreLine Trunking]
Light Technical
Light distribution
DIR  [ Direct lighting]
Operating and Electrical
Input voltage
220 to 240 V
Input frequency
50 to 60 Hz
Control signal voltage
0-16 V DC DALI
Circuit
No  [ -]
Circuit option
7  [ 7 conductors]
Initial CLO power consumption
- W
Average CLO power consumption
- W
Inrush current
22 A
Inrush time
0.275 ms
Power factor (min.)
0.97
Controls and Dimming
Dimmable
Yes
Mechanical and Housing
Housing material
Steel
Reflector material
-
Optic material
Acrylate
Optical cover/lens material
Acrylate
Fixation material
Steel
Optical cover/lens finish
Frosted
Overall length
1730 mm
Overall width
95 mm
Overall height
52 mm
Height
52 mm
Diameter
-
Approval and Application
Ingress protection code
IP20  [ Finger-protected]
Mech. impact protection code
IK02  [ 0.2 J standard]
Initial Performance (IEC Compliant)
Initial luminous flux
8000 lm
Luminous flux tolerance
+/-1%
Initial LED luminaire efficacy
148 lm/W
Init. Corr. colour temperature
4000 K
Init. colour rendering index
≥80
Initial chromaticity
(0.38, 0.38) SDCM <3
Initial input power
54 W
Power consumption tolerance
+/-10%
Over Time Performance (IEC Compliant)
Control gear failure rate at median useful life 50000 h
5 %
Lumen maintenance at median useful life* 50000 h
L80
Application Conditions
Ambient temperature range
-20 to +35 °C
Performance ambient temperature Tq
25 °C
Maximum dimming level
1%
Suitable for random switching
No
Product Data
Full product code
871869638092500
Order product name
LL121X LED80S/840 1x PSD WB 7 WH
EAN/UPC – product
8718696380925
Order code
38092500
Numerator – quantity per pack
1
Numerator – packs per outer box
1
Material no. (12NC)
910925863971
Net weight (piece)
3.850 kg

Eco passport - Our environmental product specifications overview

Philips cares about the environment and society at large, and strongly supports eco-design of products.

Installation Diagrams
Photometrics
IFGU1_LL121X1xLED80S840WB
IFGU1_LL121X1xLED80S840WB
Downloads
Leaflets
Green Data
Visuals
Software Plugins

Recently Viewed

  • Add product
     
  • Add product
     
  • Add product
     
Add product