Maxos TL-D, trapeze reflectors and optics

4MX092 TL-D trapeze reflectors4MX093 TL-D trapeze reflecor optics

Maxos TL-D, trapeze reflectors and optics

      Product family information

      The sturdy trapeze reflectors for TL-D are designed primarily for applications in industry, supermarkets and shops. They are made of steel with a white or silver finish. The reflectors are optimized for electrical units holding 1 or 2 TL-D lamps and provide an excellent light output ratio. There are basic trapeze reflectors without an additional mirror inlay and trapeze reflectors with dedicated aluminum mirror inlays. These are designed for wide-beam, narrow-beam and asymmetrical wall-washing light distributions. Moreover, perforated and slotted trapeze reflectors (without mirror inlays) can be ordered for design reasons or to create an indirect uplighting effect. For glare reduction, the trapeze reflector can be equipped with a steel louver (L-T) that has a white or silver finish. If emergency lighting by means of separately connected orientation light units (E27-sockets) is required, special trapeze reflectors with a bigger cut-off must be used. The length of this reflector corresponds to that of the 58 W trunking length. A 36 W electrical unit plus the orientation light unit will fill this length. The reflectors are fixed to the electrical units via a simple click-in. The reflectors can be connected to each other in a line by means of an integrated connection at one end of the reflector. End plates for the beginning and end of the light line are available as accessories.

      Benefits

      Aluminum reflectors optimized for applications in supermarkets, shops, distribution centers and industry
      Choice of semi-high-gloss aluminum reflectors for wide, medium, narrow and (double-) asymmetrical beam distributions, and high-gloss aluminum reflector for very narrow beams
      Simple click-fixing to the electrical unit; reflectors can be connected in lines by overlap
      Product family details
      General
      Type
      • 4MX092 (TL-D reflector)
      • 4MX093 (TL-D louver/optic)
      Suitable electrical unit
      • For 1 and 2 TL-D 36 and 58 W versions
      Material and light distribution
      • Reflector:
      • Steel, trapeze (T)
      • Steel, trapeze (T), with high gloss aluminum mirror, wide beam (-WB)
      • Steel, trapeze (T), with high gloss aluminum mirror, narrow beam (-NB)
      • Steel, trapeze (T), with high gloss aluminum mirror, asymmetrical half reflector (-A)*
      • Steel, trapeze (T), with high gloss aluminum mirror, asymmetrical wallwasher (TI-A)*
      • Reflector option:
      • Slotted, direct/indirect (T-S-D/I) or perforated (T-P)
      • Optic and louver:
      • Steel lamellae, white (L-T WH) or silver (L-T SI)
      Installation
      • Click-in fixation on electrical unit
      Accessory
      • Trapeze reflector end caps 1 and 2-lamp version (9MX056 EP1-T WH/SI, 9MX056 EP2-T WH/SI)
      Remarks
      • * For 1-lamp version only
      • Dedicated reflectors for 1- and 2-lamp TL-D versions
      Main applications
      • Retail and general industry
      • Add product
         
      • Add product
         
      • Add product
         
      Add product

      Cannot find what you’re looking for?
      Perhaps one of these links might help