More brands from

    View all 18 products

    Maxos TL5 standard trunking

    Maxos TL5 standard trunking – Robust rails

    Maxos TL5 standard trunking
    • Product
    • IES
    • Leaflet

    Sort by:

        Product family information

        The trunking fulfils two functions: first, it provides a sturdy in-line mounting rail on which to fix the electrical units, and second, it provides a housing for the electrical cables that bring power to the units. All the light-line sections are made of hot-dip galvanized steel with a white or silver finish. They are available in dedicated TL5 lengths of 1, 2 and 3 electrical units 49 W (35/80 W) and 54 W (28 W).A flat ribbon cable (5 or 7 wires) or two flat ribbon cables (2 x 5 or 2 x 7 wires) are integrated in the trunking and guarantee (in combination with an integrated phase selection switch and contact blocks) safe and correct cabling. The 7-wire cable is used to integrate light regulation or emergency lighting for those electrical units that are equipped with emergency battery packs. Double wiring (2 x 5 or 2 x 7 wires) is needed to provide a completely separate mains supply to the electrical units. Double wiring is mostly used for emergency lighting by central emergency batteries or separate switching. Hence, no extra contact blocks or wiring are required.For suspended light lines, the light-line sections are connected using the integrated electrical connector and a sturdy external mechanical coupling piece (accessory). Surface-mounted light lines use the same integrated electrical connector and an internal coupler (accessory). On the upper part of the light-line section, special knock-out openings enable cable entry wherever needed.The trunking is available with a complete range of interchangeable components that optimize flexibility. The outstanding stability of the sections and coupling pieces allows suspension intervals of 3.4 to 5 m.The basic accessories of Maxos TL-D trunkings can also be used for the TL5 trunkings.

        Benefits

        Provides a sturdy mounting rail for the electrical units and a housing for the electrical power cables
        Integrated flat ribbon cables, phase selection switch and contact blocks guarantee safe and correct cabling
        Available with a complete range of interchangeable components to optimize flexibility

        Features

        Easy to install
        Integrated flat-ribbon cables, phase-selection switch and contact blocks guarantee safe and correct cabling. Wide choice of flat-ribbon cables: 1 x or 2 x 5 x 1.5 or 2.5 mm 1 x or 2 x 7 x 1.5 or 2.5 mm
        Sturdy construction allows distances between suspension points of 3.4 to 5 m.
        The trunking is available with a complete range of interchangeable components that optimize flexibility.
        Possibility to integrate two NYM cables

        Applications

        Industry
        Shops
        Schools
        Downloads
        Leaflets
        Visuals
        Product family details
        General
        Type
        • 4MX656
        Length
        • 1 x, 2 x or 3 x length of electrical unit 49 W (491, 492 or 493), for 80 and 35 W electrical units as well
        • 1 x, 2 x or 3 x length of electrical unit 54 W (541, 542 or 543)
        Electrical circuit option
        • 1 x or 2 x flat ribbon cable, 5 or 7 wires:
        • 1 x or 2 x 5 x 1.5 or 2.5 mm2
        • 1 x or 2 x 7 x 1.5 or 2.5 mm2
        Material
        • Hot-dip galvanized steel in white (WH) or silver (SI)
        Accessory
        • Trunking end piece, mains connection, trunking coupling pieces, etc. (see chapter Maxos accessories)
        Remarks
        • 7-wire cable for integration of light regulation or emergency lighting
        • Double wiring for emergency lighting by central emergency batteries or separate switching
        • Add product
           
        • Add product
           
        • Add product
           
        Add product

        Cannot find what you’re looking for?
        Perhaps one of these links might help