View all 2 products

ActiLume MicroLuxSense

ActiLume MicroLuxSense - simple daylight regulation

  • Name

      Product family information

      ActiLume MicroLuxSense is connected to the 1-10 V DC control input of the HFR ballast. ActiLume MicroLuxSense dims light down close to the minimum level of the ballast. ActiLume MicroLuxSense is calibrated for use in a standard office situation with 600 lux installed and 500 lux required.

      Benefits

      A Daylight Regulation device which can easily be fitted in a 1-10V luminaire
      Offers energy saving opportunities when installed near windows
      Has same form fit as Actilume sensor with cover

      Features

      If needed, ActiLume MicroLuxSense can be manually adjusted by a rotating diaphragm to adjust the set point. The sensitivity of the sensor can be changed within a range from 1/3 to 3
      The new set point can be copied for all ActiLume MicroLuxSense luminaires with similar daylight and reflection conditions
      ActiLume MicroLuxSense can regulate up to 20 luminaires equipped with Philips HFR ballasts
      The light sensor can either be clicked between the optics or next to the optics. The sensor has latching rills (equivalent to the ActiLume sensor)

      Applications

      ActiLume MicroLuxSense is designed for all office applications
      ActiLume MicroLuxSense is designed for average ceiling heights of between 2.5 and 3 m
      Downloads
      Leaflets
      Visuals
      • Add product
         
      • Add product
         
      • Add product
         
      Add product

      Cannot find what you’re looking for?
      Perhaps one of these links might help