More brands from

      Product family information

      Copenhagen was developed in conjunction with Copenhagen’s Office of City Architecture to enhance the aesthetic appeal of the city’s lighting. The result is a luminaire that can be used for a number of applications, from roads to squares, while maintaining design consistency. Copenhagen is available in two sizes to ensure that the scale of the luminaire is always in keeping with the varying heights of poles and suspensions. A choice of symmetrical or asymmetrical distributions and a wide selection of light sources, including state-of-the-art LED technology, complete the specification of an extremely adaptable luminaire.

      Benefits

      Design continuity assured, also in the event of future upgrades
      Up to 70% energy saving
      Future-proof: LED engine and driver serviceable and upgradeable

      Features

      LEDGINE inside – state-of-the-art, future-proof LED technology
      Elegant design
      Suitable for catenary as well as side-entry mounting

      Applications

      Residential streets
      Pedestrian and cycle paths
      Minor roads
      Product family details
      General
      Type
      • BGS443
      Light source
      • Replaceable LED module
      Power (steady state in W, +/- 10%)
      • 16 LED version: 31.5 W
      • 24 LED version: 23.4 W
      Luminous flux
      • 803 or 1209 lm depending on amount of LED's
      Correlated Color Temperature
      • 3100 K, warm white
      Color Rendering Index
      • 80
      Maintenance of lumen output - L90
      • ..,... hours at 25ºC
      Maintenance of lumen output - L70
      • ..,... hours at 25ºC
      Maintenance of lumen output - L50
      • ..,... hours at 25ºC
      Driver failure rate
      • 0.2% per 1000 hours
      Operating temperature range
      • -20ºC to +25ºC
      Driver
      • Built-in
      Mains voltage
      • 220-240 V / 50-60 Hz
      Options
      • Light regulation: Lumistep LS-6, LS-8 and LS-10
      Material
      • Housing: re-inforced polyester
      • Spigot: cast aluminum
      • Optical cover: tempered glass
      • Springs: stainless steel
      Optic
      • Narrow Street Optic (NSO)
      • Medium Street Optic (MSO)
      • The benefit of this optic is that it is a multi layer optic
      Optical cover
      • Micro lens optic
      Color
      • Unpainted glass fiber RAL 7035
      • Other RAL or AKZO futura colors available on request
      Installation
      • Side-entry mounting: lateral entry Ø 48 mm
      • Optional suspension adaptor for mounting on dedicated brackets or catenary
      • Recommended mounting height: 3,5 to 6 m
      • Tilt angle luminaire: 0º
      • Tilt angle of LED module in luminaire: 5º
      • With side entry, luminaire is tiltable by -3 or +3º
      • Max SCx: 0.08 m²
      • Delivered with 10 m cable
      Accessories
      • Dedicated mast and wall brackets available for different mounting possibilities
      • Add product
         
      • Add product
         
      • Add product
         
      Add product

      Cannot find what you’re looking for?
      Perhaps one of these links might help