StreetSaver – saves energy and more


    Product family information

    Under new regulations, all mercury-based lamps are prohibited from 2015 onwards. This means that all luminaires using these lamps need to be replaced as well. However, the installed base of these luminaires is huge, and the municipalities do not have the budget for such large-scale replacement, especially in this period of economic austerity. At the same time, the municipal authorities are facing tremendous pressure to save energy and to reduce light pollution of the night sky (many mercury installations have a transparent bowl, sending light everywhere).StreetSaver is an affordable, high-quality solution that enables the municipalities to address all these issues at once by changing their mercury- based luminaires to a LED system – for only limited investment.


    Energy savings of up to 70% compared to mercury-based post-top luminaires
    Minimizes light pollution
    Designed around LEDs


    Dedicated LED design
    All the light is directed towards the ground
    Robust aluminum housing
    Lifetime of 50,000 hours


    Residential areas
    Piazzas and parks
    Pedestrian areas
    Product family details
    • BPP007
    Light source
    • Integral LED-module
    • 40 W (dimmable version)
    • 39 W (non-dimmable version)
    Beam angle
    • 120º, rotation symmetric
    Luminous flux
    • 2350 lm, warm white; 2456 lm, neutral white (dimmable version)
    • 2442 lm, warm white; 2417 lm, neutral white (non-dimmable version)
    Luminaire efficacy
    • Up to 61 lm/W (dimmable version)
    • Up to 62 lm/W (non-dimmable version)
    Correlated Color Temperature
    • 3000 or 4000 K
    Color Rendering Index
    • > 80, 3000 K
    • > 70, 4000 K
    Maintenance of lumen output - L70
    • 50,000 hours at 35ºC
    Driver failure rate
    • 0.5% per 6000 hours (dimmable version)
    • 0.5% per 5000 hours (non-dimmable version)
    Operating temperature range
    • -20 ºC < T
    • Built-in (self ballasted LED-module)
    Mains voltage
    • 230 V / 50-60 Hz
    Inrush current
    • 65 A at 100 µs (dimmable version)
    • 7.1 A at 61.2 µs (non-dimmable version)
    • Symmetrical wide beam
    Optical cover
    • Cover flat
    • Housing: aluminum
    • Optical cover: polycarbonate
    • Ultra-dark grey
    • Pre-wired
    • Easy access to driver
    • Post top 60 mm pole fixation
    • Fixation with 2 M10x25 screws
    • Pre-wired with 6 m cable
    • Recommended mounting height: 4 m
    • Standard tilt angle post top: 0º
    • Adjustable tilt angle: not available
    • Adjustable light distribution: not available
    • Max SCx: 0.08 m²
    • Add product
    • Add product
    • Add product
    Add product

    Cannot find what you’re looking for?
    Perhaps one of these links might help