Product family information

        The MASTER TL-D Xtra Polar lamp offers the highest light output at lower temperatures because of the insulation that is created by putting a TL-D (T8) lamp into a T12 tube. The lamp is especially suitable for applications in cold environments where relamping is costly and complex.


        High lighting level in low-ambient-temperature applications compared with other fluorescent tubes
        Sharp reduction in maintenance costs due to high reliability and long lifetime
        Supports end-user sustainability programs (low mercury level and low waste due to long lifetime)


        Improved light output in low ambient temperatures
        Peak luminous flux for 58 W is reached at an ambient temperature of -5 °C around the lamp
        The same reliable, long‑lifetime performance as regular MASTER TL-D Xtra


        All applications at lower ambient temperatures (below 10 °C)
        Indoor: cold stores and other refrigerated areas
        Outdoor: petrol stations, car parks, shipping docks, petrochemical plants, sign lighting, tunnels

        Warning & Safety

        To achieve published lifetimes for 100% operation, do not dim below 30%
        When used on electromagnetic gear, it is strongly recommended to apply only Philips S10 or S10E starters (for 18W types S2 or S2E) to achieve the published lifetimes, and to install new starters when relamping.
        A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
        • Add product
        • Add product
        • Add product
        Add product

        Cannot find what you’re looking for?
        Perhaps one of these links might help