This TL-D Xtreme lamp has a protective coating that keeps glass and lamp components together in the event of accidental breakage. The lamp is easily identifiable by a blue ring at one end. Application areas are all places where glass shatters can disturb operations and can have an impact on product and people safety, e.g. the food and beverage industry. The lamp has a Teflon coating . It is compliant with HACCP regulations.
Special protective coating around the lamp prevents products from contamination in case of accidental lamp breakage, easily recognized in audit situation by one blue ring at one end
The protective coating has a high temperature-resistance and no degradation to be expected under influence of temperature or UV within specified lamp life (50% failures @ 3 hrs switching cycle)
Makes luminaires compliant with relevant standards in the industry, such as HACCP, ISO 22000 and IEC 61549
Protective coating (Teflon) around the lamp, indicated by one blue ring at one end
Extremely long life and high reliability, identified by x-shaped end-cap to distinguish the lamp from other fluorescent lamps
Recommended to use with electronic gear that allows higher efficacy and longer lifetime
Use in open and closed luminaires possible (as indicated by one blue ring), due to strong, temperature-resistant coating
Food & beverages and pharmaceuticals industry: factories, distribution centres, retail outlets; locations where maintenance and/or process disruption costs are high (high ceilings, difficult access)
Warning & Safety
To achieve published lifetimes for 100% operation, do not dim below 30%
When used on electromagnetic gear, it is strongly recommended to apply only Philips S10 or S10E starters (for 18W types S2 or S2E) to achieve the published lifetimes, and to install new starters when relamping.
A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
It’s strongly recommended to replace Secura lamps before or at the moment the specified lamp life (50% failures @ 3 hrs switching cycle) is reached.