You are now visiting the Philips lighting website. A localized version is available for you.
Suggestions
    • CoreLine Trunking – the clear choice for LED

      LL120X LED160S/865 1x PSD MB 7 WH
      LED
      LL120X LED160S/865 1x PSD MB 7 WH

      LL120X LED160S/865 1x PSD MB 7 WH

      Order code: 38189200

      Full Product Code: 871869638189200

    Specifications Show all

    General Information
    Number of light sources
    6  [ 6 pcs]
    Lamp family code
    LED160S  [ LED module, system flux 16000 lm]
    Beam angle of light source
    120 °
    Light source colour
    865 cool daylight
    Light source replaceable
    No
    Number of gear units
    1 unit
    Driver/power unit/transformer
    PSD  [ Power supply unit with DALI interface]
    Driver included
    Yes
    Optic type
    MB  [ Medium beam]
    Optical cover/lens type
    No  [ -]
    Luminaire light beam spread
    76° x 74°
    Emergency lighting
    No  [ -]
    Control interface
    DALI
    Internal wiring
    Standard
    Feed-through wiring
    Feed-through wiring 7-phase
    Connection
    CU7  [ Connection unit 7-pole]
    Cable
    -
    Protection class IEC
    Safety class I (I)
    Mounting
    SMB  [ Ceiling-mounting bracket]
    Ready-to-install
    -
    Glow-wire test
    650/5  [ Temperature 650 °C, duration 5 s]
    Flammability mark
    F  [ For mounting on normally flammable surfaces]
    Accessories included
    MB-SW  [ Mounting bracket for suspension wire]
    CE mark
    CE mark
    ENEC mark
    ENEC mark
    Mechanical accessories
    No  [ -]
    Remarks
    *- According to the Lighting Europe guidance paper 'Evaluating performance of LED based luminaires – January 2018': statistically there is no relevant difference in lumen maintenance between the B50 and, for example, the B10. Therefore, the median useful life (B50) value also represents the B10 value.
    Constant light output
    No
    Number of products on MCB (16 A type B)
    12
    EU RoHS compliant
    Yes
    Product family code
    LL120X  [ CoreLine Trunking]
    Unified glare rating CEN
    Not applicable
    Light Technical
    Light distribution
    DIR  [ Direct lighting]
    Operating and Electrical
    Input Voltage
    220 to 240 V
    Input frequency
    50 to 60 Hz
    Control signal voltage
    0-16 V DC DALI
    Circuit
    No  [ -]
    Circuit option
    7  [ 7 conductors]
    Initial CLO power consumption
    - W
    Average CLO power consumption
    - W
    Inrush current
    4.8 A
    Inrush time
    2.3 ms
    Power factor (min.)
    0.97
    Controls and Dimming
    Dimmable
    Yes
    Mechanical and Housing
    Housing material
    Steel
    Reflector material
    -
    Optic material
    Acrylate
    Optical cover/lens material
    Acrylate
    Fixation material
    Steel
    Optical cover/lens finish
    Frosted
    Overall length
    3450 mm
    Overall width
    95 mm
    Overall height
    52 mm
    Height
    52 mm
    Diameter
    -
    Colour
    White
    Dimensions (height x width x depth)
    52 x 95 x 3450 mm (2 x 3.7 x 135.8 in)
    Approval and Application
    Ingress protection code
    IP20  [ Finger-protected]
    Mech. impact protection code
    IK02  [ 0.2 J standard]
    Initial Performance (IEC Compliant)
    Initial luminous flux
    16000 lm
    Luminous flux tolerance
    +/-2%
    Initial LED luminaire efficacy
    148 lm/W
    Init. Corr. Colour Temperature
    6500 K
    Init. Colour rendering index
    ≥80
    Initial chromaticity
    (0.38, 0.38) SDCM <3
    Initial input power
    108 W
    Power consumption tolerance
    +/-10%
    Over Time Performance (IEC Compliant)
    Control gear failure rate at median useful life 50,000 h
    5 %
    Lumen maintenance at median useful life* 50,000 h
    L80
    Application Conditions
    Ambient temperature range
    -20 to +35 °C
    Performance ambient temperature Tq
    25 °C
    Maximum dimming level
    1%
    Suitable for random switching
    No
    Product Data
    Full product code
    871869638189200
    Order product name
    LL120X LED160S/865 1x PSD MB 7 WH
    EAN/UPC – product
    8718696381892
    Order code
    38189200
    SAP numerator – quantity per pack
    1
    Numerator – packs per outer box
    1
    SAP material
    910925864069
    SAP net weight (piece)
    7.130 kg
    Installation Diagrams
    Downloads
    Leaflets
    Visuals
    Brochures

    Recently Viewed

    • Add product
       
    • Add product
       
    • Add product
       
    Add product