XITANIUM 35W 0.08-0.35A 220V TD21 230V

Specifications Show all

Operating and Electrical

Maximum Efficiency at Full Load	91.2 %
Mains voltage performance (DC)	186-250 V
Output Current Ripple (Max)	4 %
Protection Level Up (L-N) at 5 kA (Max)	1 kV
Constant Current (CC)	True
Constant Voltage (CV)	False
Output Current (Max)	350 mA
Input current (DC)	0.22
Energy Metering	No
Diagnostics	True
Line Frequency	50 to 60 Hz
Output Current (Min)	80 mA
Number of Products on MCB (16A Type-C) (Max)	22 piece/unit
Output Power (Min)	10 W
Total Harmonic Distortion IEC (Max)	20 %
Output Voltage (Min)	50 V
Default output current	80 mA
Inrush Current Peak (Max)	23.1 A
Protection Level Up (LN-Earth) at 5 kA (Max)	2 kV
Output Voltage (Max)	220 V
Power Factor 100% Load (Max)	0.9
Open Circuit Voltage (DC) (Max)	250 V
Output Current Tolerance (Max)	5 %
Input Frequency	50 to 60 Hz
Input current (AC)	0.18 mA
Inrush Current Width to 50% of Peak	221 µs
Mains voltage operation (DC)	168-275 V
Power Factor (Fraction)	0.9
Output Power (Max)	35 W

Product Data

Numerator - Quantity Per Pack	1
Full product code	871869965373600
Order code	929001681706
EAN/UPC - Case	8718699653743
Material number (12NC)	929001681706
Full product name	XITANIUM 35W 0.08-0.35A 220V TD21 230V
Order product name	XITANIUM 35W 0.08-0.35A 220V TD21 230V
Numerator - Packs per outer box	24

Approval and Application

Ingress protection code	IP20  [Finger-protected]
Short Circuit Protection	Protected
Protection class IEC	Safety class I
Approval Marks	CCC certificate	CE marking	ENEC certificate	RCM compliance	REACH compliance	RoHS compliance
Corridor Mode	True
Isolation Classification	No
Output Current Set Options	LEDset,Programmable
Over Power Protection	Protected
Open Circuit Protection	Protected

Controls and Dimming

Constant light output	Programmable
DynaDimmer	No
Dimming Range	100-1 %
D4i compliant	No
Dimmable	DALI

General Information

Nominal lifetime	100,000 hour(s)
Lighting Technology	LED

Mechanical and Housing

Overall width	30 mm
Product Length	280 mm
Housing	Office 280x30x21 7p4p
Dimensions (Height x Width x Depth)	21 x 30 x 280 mm
Overall length	280 mm
Overall height	21 mm

Wiring

Input Wire Cross Section (Min)	0.5 mm²
Output Wire Cross Section (Min)	0.5 mm²
Output Wire Cross Section (Max)	1.5 mm²
Output wire strip length	8 mm to 9 mm mm
Input Wire Cross Section (Max)	1.5 mm²
Input Wire Gauge	16-20
Hot Wiring	no
Input wire strip length	8 mm to 9 mm mm
Connector Type Input Terminals	Wago 744
Cable Length From Device to Lamp	2 m
Connector Type Output Terminals	Wago 744

Temperature

T-Case Lifetime (Max)	65 °C
Ambient temperature range	-25 °C to 50 °C
Maximum case temperature (in case of failure)	110 °C
T-Case Maximum (Max)	75 °C
Module Temperature Protection	no

System characteristics

YellowDot ready	No
Central DC Operation	Yes