You are now visiting the Philips lighting website. A localized version is available for you.
Suggestions
    • Unsurpassed energy-efficient and long-lasting solution

      HF-P 180 TL5/PL-L 220-240V 50/60Hz IDC
      HF-P 180 TL5/PL-L 220-240V 50/60Hz IDC
      HF-Performer III for TL5 lamps

      HF-P 180 TL5/PL-L 220-240V 50/60Hz IDC

      Order code: 95228500

      Full product code: 872790095228500

      Downloads

      Spec Sheet
      Size:210.7 kB

      See all downloads

    Specifications Show all

    General information
    Application code
    III
    Type version
    IDC
    Lamp type
    TL5/PL-L
    Number of lamps
    1 piece/unit
    Number of products on MCB (16 A type B) (nom.)
    20
    Automatic restart
    Yes
    Operating and electrical
    Input Voltage
    220 to 240 V
    Input frequency
    50 to 60 Hz
    Operating frequency (nom.)
    45 kHz
    Ignition method
    Programmed Start
    Crest factor (max.)
    1.7
    Power factor 100% load (nom.)
    0.99
    Ignition time (max.)
    0.9 s
    Mains voltage performance (AC)
    -8%-+6%
    Mains voltage safety (AC)
    -10%-+10%
    Earth leakage current (nom.)
    0.5 mA
    Inrush current width
    0.30 ms
    Constant wattage deviation
    -2%/+2%
    Ballast factor (nom.)
    1
    Power factor (nom.)
    0.99
    Power losses (nom.)
    4-4.5 W
    Inrush current peak (max.)
    24 A
    Efficiency at full load [%]
    96.39 %
    Wiring
    Connector type input terminals
    WAGO 251 universal connector  [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
    Cable capacity output wires mutual (nom.)
    200 pF
    Connector type output terminals
    WAGO 251 universal connector  [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
    Cable length hot-wiring
    0.75 m
    Wire strip length
    8.0-9.0 mm
    Dual fixture master/slave
    Not applicable  [ Master/Slave oper. not applicable]
    Input terminal cross section
    0.50-1.00 mm²
    Output terminal cross section
    0.50-1.00 mm²
    Cable capacity output wires to earth (nom.)
    200 pF
    System characteristics
    Rated ballast-lamp power
    80 W
    Rated lamp power on PL-L
    80 W
    System power on PL-L
    78 W
    Lamp power on PL-L
    74 W
    Power loss on PL-L
    4 W
    Rated lamp power on TL5
    80 W
    System power on TL5
    75 W
    Lamp power on TL5
    71 W
    Power loss on TL5
    4 W
    System power on TL5 ECO
    74.5 W
    Lamp Power on TL5 ECO
    70 W
    Power loss on TL5 ECO
    4.5 W
    Temperature
    T-ambient (max.)
    60 °C
    T-ambient (min.)
    -25 °C
    T storage (max.)
    50 °C
    T storage (min.)
    -40 °C
    T-case lifetime (nom.)
    80 °C
    T-Case maximum (max.)
    80 °C
    T-Ignition (max.)
    60 °C
    T-Ignition (min.)
    -25 °C
    Mechanical and housing
    Housing
    L 360x30x21
    Emergency operation
    Nominal light output after 60 seconds
    100% of EBLF
    Battery voltage lamp ignition
    186-275 V
    Normal operating voltage (DC)
    220-240 V
    Battery voltage lamp operation
    176-275
    Battery voltage guaranteed operation
    176-275 V
    Battery voltage guaranteed ignition
    186-275 V
    Emergency ballast lumen factor (EBLF) (nom.)
    100 %
    Nominal light output after 5 seconds
    50% of EBLF
    Approval and application
    Energy efficiency index
    A2 BAT
    IP classification
    IP 20  [ Ingress Protection 20]
    EMI 9 kHz ... 30 MHz
    EN 55015 edition 7.1
    EMI 30 MHz ... 1,000 MHz
    EN55022 level B
    Safety standard
    IEC 61347-2-3
    Performance standard
    IEC 60929
    Quality standard
    ISO 9000:2000
    Environmental standard
    ISO 14001
    Harmonic current emission standard
    IEC 61000-3-2
    EMC immunity standard
    IEC 61547
    Vibration standard
    IEC68-2-6 F c
    Bumps standard
    IEC 68-2-29 Eb
    Humidity standard
    EN 61347-2-3 clause 11
    Approval marks
    CE marking
    ENEC certificate
    VDE-EMV certificate
    Temperature marking
    Yes
    Emergency standard
    IEC 60598-2-22
    Humming and noise level
    < 30 dB(A)
    Product data
    Full product code
    872790095228500
    Order product name
    HF-P 180 TL5 III 220-240V 50/60Hz
    EAN/UPC – product
    8727900952285
    Order code
    95228500
    SAP numerator – quantity per pack
    1
    Local code description
    REATOR ELETRONICO FLUOR HF-P 180 TL5III
    Numerator – packs per outer box
    12
    SAP material
    913713034266
    Net Weight (Piece)
    0.250 kg
    Installation Diagrams
    HF-P 180 TL5 III 220-240 V 50/60 Hz
    HF-P 180 TL5 III 220-240 V 50/60 Hz
    HF-P 180 TL5 III 220-240 V 50/60 Hz
    HF-P 180 TL5 III 220-240 V 50/60 Hz
    HF-P 180 TL5 III 220-240 V 50/60 Hz
    HF-P 180 TL5 III 220-240 V 50/60 Hz
    Downloads
    Leaflets
    Visuals

    Recently Viewed

    • Add product
       
    • Add product
       
    • Add product
       
    Add product