BDP100 LED20/830 DW PCF SI CLO 62P

Specifications Show all

Operating and Electrical

Connection	Screw connection block 5-pole
Number of products on MCB of 16 A type B	20
Initial CLO power consumption	15.4 W
Power Consumption	15.8 W
Average CLO power consumption	15.6 W
Line Frequency	50 to 60 Hz
Input Voltage	220-240 V
Inrush current	22 A
Cable	-
Input Frequency	50 to 60 Hz
Inrush time	0.29 ms
Power Factor (Fraction)	0.94
End CLO power consumption	15.8 W

Product Data

Full product name	BDP100 LED20/830 DW PCF SI CLO 62P
Order code	910500991112
Material number (12NC)	910500991112
EAN/UPC - Case	8718291910510
Order product name	BDP100 LED20/830 DW PCF SI CLO 62P
Numerator - Quantity Per Pack	1
Full product code	871829191051000
Numerator - Packs per outer box	1

Over Time Performance (IEC Compliant)

Driver failure rate at 5000 h	0.5 %
Control gear failure rate at median useful life 100000 h	10 %
Lumen maintenance at median useful life* 100000 h	98

Approval and Application

Ingress protection code	IP66  [Dust penetration-protected, jet-proof]
Surge Protection (Common/Differential)	Luminaire surge protection level until 4 kV differential mode and 4 kV common mode
Protection class IEC	Safety class I
CE mark	Yes
EU RoHS compliant	Yes
Flammability mark	-
Warranty period	5 years
Sustainability rating	-
Mech. impact protection code	IK10  [20 J vandal-resistant]
Glow-wire test	Temperature 650 °C, duration 5 s
ENEC mark	ENEC mark

Controls and Dimming

Constant light output	Yes
Driver/power unit/transformer	Power supply unit regulating with constant light output
Control interface	-
Dimmable	No

Mechanical and Housing

Optic material	Acrylate
Mounting device	Post-top for diameter 62 mm
Housing Color	Silver
Optical cover/lens shape	Conical
Optical cover/lens material	Polycarbonate
Fixation material	Steel
Overall diameter	570 mm
Housing Material	Aluminum
Optical cover/lens finish	Frosted
Effective projected area	0.051 m²
Reflector material	-
Overall height	209 mm

General Information

Photocell	-
Light source replaceable	Yes
Light source engine type	LED
Lamp family code	LED20  [LED Module 2000 lm]
Driver included	Yes
Service tag	Yes
Product family code	BDP100  [TOWNGUIDE PERF FLAT CONE]
Number of gear units	1 unit
Embedded control	Constant light output
Value ladder	Performance
Lighting Technology	LED

Application Conditions

Maximum dim level	Not applicable
Performance ambient temperature Tq	25 °C

Initial Performance (IEC Compliant)

Initial chromaticity	(0.43, 0.40) SDCM <5
Init. Color Rendering Index Tolerance	+/-2
Power consumption tolerance	+/-10%
Luminous flux tolerance	+/-7%

Temperature

Ambient temperature range

-40 to +35 °C

Light Technical

Number of light sources	4
Correlated Color Temperature (Nom)	3000 K
Luminous Efficacy (rated) (Nom)	75 lm/W
Upward light output ratio	3
Optical cover/lens type	Polycarbonate bowl/cover frosted
Luminous Flux	1,160 lumen
Light source color	830 warm white
Color rendering index (CRI)	80
Luminaire light beam spread	50° x 70°
Optic type outdoor	Distribution wide
Standard tilt angle posttop	0°
Standard tilt angle side entry	-