BDP102 LED50/830 DW PCF SI CLO 62P

Specifications Show all

Operating and Electrical

Number of products on MCB of 16 A type B	10
Connection	Screw connection block 5-pole
Initial CLO power consumption	37 W
Power Consumption	40 W
Cable	-
Line Frequency	50 to 60 Hz
Input Voltage	220-240 V
Inrush current	45 A
Average CLO power consumption	38.5 W
Input Frequency	50 to 60 Hz
Inrush time	0.285 ms
Power Factor (Fraction)	0.95
End CLO power consumption	40 W

Product Data

Full product name	BDP102 LED50/830 DW PCF SI CLO 62P
Order code	910500991131
Material number (12NC)	910500991131
EAN/UPC - Case	8718291910701
Order product name	BDP102 LED50/830 DW PCF SI CLO 62P
Numerator - Quantity Per Pack	1
Full product code	871829191070100
Numerator - Packs per outer box	1

Over Time Performance (IEC Compliant)

Driver failure rate at 5000 h	0.5 %
Control gear failure rate at median useful life 100000 h	10 %
Lumen maintenance at median useful life* 100000 h	91

Approval and Application

Ingress protection code	IP66  [Dust penetration-protected, jet-proof]
Surge Protection (Common/Differential)	Luminaire surge protection level until 6 kV differential mode and 6 kV common mode
Protection class IEC	Safety class I
CE mark	Yes
EU RoHS compliant	Yes
Flammability mark	-
Warranty period	5 years
Sustainability rating	-
Mech. impact protection code	IK10  [20 J vandal-resistant]
Glow-wire test	Temperature 650 °C, duration 5 s
ENEC mark	ENEC mark

Controls and Dimming

Constant light output	Yes
Driver/power unit/transformer	Power supply unit regulating with constant light output
Control interface	-
Dimmable	No

Mechanical and Housing

Optic material	Acrylate
Mounting device	Post-top for diameter 62 mm
Housing Color	Silver
Optical cover/lens shape	Conical
Optical cover/lens material	Polycarbonate
Optical cover/lens finish	Frosted
Fixation material	Steel
Overall diameter	570 mm
Housing Material	Aluminum
Effective projected area	0.088 m²
Reflector material	-
Overall height	317 mm

General Information

Photocell	-
Light source replaceable	Yes
Light source engine type	LED
Lamp family code	LED50  [LED module 5000 lm]
Driver included	Yes
Number of gear units	1 unit
Embedded control	Constant light output
Service tag	Yes
Product family code	BDP102  [TOWNGUIDE PERF CLASSIC CONE]
Value ladder	Performance
Lighting Technology	LED

Application Conditions

Maximum dim level	Not applicable
Performance ambient temperature Tq	25 °C

Initial Performance (IEC Compliant)

Initial chromaticity	(0.43, 0.40) SDCM <5
Init. Color Rendering Index Tolerance	+/-2
Power consumption tolerance	+/-10%
Luminous flux tolerance	+/-7%

Temperature

Ambient temperature range

-40 to +35 °C

Light Technical

Number of light sources	6
Correlated Color Temperature (Nom)	3000 K
Optic type outdoor	Distribution wide
Luminous Efficacy (rated) (Nom)	73 lm/W
Optical cover/lens type	Polycarbonate bowl/cover frosted
Upward light output ratio	10
Luminous Flux	2,714 lumen
Color rendering index (CRI)	80
Light source color	830 warm white
Luminaire light beam spread	50° x 70°
Standard tilt angle posttop	0°
Standard tilt angle side entry	-